close translate
Products
Material Handling

Trans-Flo Pneumatic Bulk Cement Unloaders

  • overview
Equipment installs? Engineering? Design? Permitting? Complete Turnkey project?
You can trust us to ensure that your project is handled competently.
your name
email address
zip code

Overview

Trans-Flow Corporation pneumatic unloaders in 30 hp, 40 hp or 60 hp capacities unload any bulk dry granular material such as fly ash, fertilizer, lime, kaolin clay, powders, pelletized plastics and dry cement. They deliver a steady stream of low pressure air at 12 or 15 psi into the tanker through one pipeline and out through another. They can unload a bulk tanker up to 15 minutes faster than a turbo conveyor. The motor is totally enclosed, fan-cooled. Standard equipment includes an air intake filter, pressure safety valve and check valve. Outlet openings can be 3" or 4". This system can add to your profits by saving time, reducing energy costs, and reducing maintenance downtime and expense.

Pneumatic Unloader
  • 30, 40 or 60 hp, 230/460 volt, 60 Hz, 3 phase T.E.F.C. motor
  • Dry replaceable intake filter Mounted on steel reinforced base
  • Pressure relief valve for overload protection
  • Check valve
  • Cam lock hose connector with dust cap
Motor Size (hp) Air Flow (cfm) Air Pressure (psi)
30 350 12
40 350 15
60 550 15

How to determine capacity requirements

Material density and pipeline length and design influence the choice of components. The table below will give you an idea of the density of typical materials handled. Please contact us and we will help you choose the correct size and capacity of system components for your application.

Typical Densitites
(Pounds per cubic foot)
ABS pellets 34.7
Cement 96.0
Clay kaolin 74.1
Fertilizer #2 75.8
Fly ash 46.2
Nylon pellets 47.3
Polystyrene 40.6
Trans-Flo Pneumatic Bulk Unloader - Mid Atlantic Concrete Equipment, Inc.
Headline for call to action goes in this area here.
Text for the call to action would go here in this area. It's purpose is to drive the user.

Features

Many models to choose from. Tanks can be custom built to meet your hot water needs. All units are available in straight #2 fuel oil or combination natural gas/oil fired.

  • Heavy duty lifting lugs for easy lifting and positioning.
  • Thick inner shell with overlapping joints for maximum durability.
  • Three-inch thick insulation prevents heat loss.
  • Corrosion-free aluminum jacket.
  • IOT manufactured burner with UL approved controls (UL approved burners upon request)
  • All tanks built to UL 142 standards.
  • Wide manhole cleanout port for inspection and maintenance.
  • Sprinkler system eliminates cold spots.
  • Primary/secondary heat transfer tubes for maximum efficiency.
  • Twin-skid supports for ease of transport and set up.
  • CLOVERLEAF supercharge gives over 90% combustion efficiencies.

For further information on Infern-O-Therm Concrete Water Heater HW Series, click here