Con-E-Co | Silos and Bins

Need to figure out how much storage you’ll need?

We use this slick online calculator ourselves to determine sizing for our customers all the time. A great resource!

Overview

Silos

Designed and engineered to fit jobsite requirements
Heavy duty steel shells and understructures
Low Pressure aeration manifolds and HD discharge valves.
Roof top dust collectors matched to pneumatic fill rates
Galvanized access ladders, cages and roof rails

Bins

Heavy steel duty structures and bin walls
Galvanized access ladders, cages and roof rails
Overbite double clam gates and power linkage
Cylinder quick dump valves for precise batching
Designed to retrofit to existing plants

CON-E-CO LO-PRO 12 CM Central Mix Mobile Portable Concrete Batch Plant

Headline for call to action goes in this area here.

Text for the call to action would go here in this area. It's purpose is to drive the user.

Features

Eagle airlift systems completely eliminate the need for messengers in
most operations.
Eagle Pneumatic Dispatch systems are compact and high-capacity,
providing two-way carrier travel in a single tube.
Easy installation.
No other pneumatic tube system can deliver paperwork, parts or samples
from one location to another with the ease, speed, low cost and safety of
an Eagle Dispatch System.
Low-cost, automatic, instantaneous dispatch system designed to convey
materials between tow similar Send/Receive Stations through a single
connection tube.
Eagle AIR-LIFT Pneumatic Systems are compact and high-capacity,
providing two-way carrier travel in a single tube. Conveying tubing and
bends are made from either strong, lightweight, non-corroding,
dent-resistant PVC or optional steel, with diameters of 3 in., 4 in., or 6 in.
Eagle AIR-LIFT Carriers are made from durable, high-density polyethylene
for excellent wear in system-compatible diameters of 3 in., 4 in., and 6 in.,
and standard lengths of 10 in., 12 in., and 14 in.
Thousands of pneumatic tube system users are proving the cost efficiency
of Eagle AIR-LIFT Pneumatic.

Headline for call to action goes in this area here.

Text for the call to action would go here in this area. It's purpose is to drive the user.

Photos

Headline for call to action goes in this area here.

Text for the call to action would go here in this area. It's purpose is to drive the user.

Specifications

Batcher Capacity

Aggregate – 1 to 12 cubic yards (1 to 9.2 cubic meters)

Cement – 1 to 12 cubic yards (1 to 9.2 cubic meters)

Scales – Direct load cells

Aggregate Batche Conveyor

36” (914 mm), 15 horsepower drive

Aggregate Discharge Conveyor

36” wide (914 mm), 45” trough with 30 horsepower drive

Cement Batcher Recirculating Screw

18” diameter (460 mm), 25 horsepower

Cement Feeder Screws

Two 12” diameter (300 mm), 20 horsepower drive

Cement Aeration

5 horsepower, high volume, low pressure blower

High Pressure Air Compressor

10 horsepower, 120 gallon (0.45 cubic meters). Optional 15, 20, 25 or 30 horsepower, 120 gallon (0.45 cubic meters)

Electrical

460 volt, 3-phase with 120 VAC transformer for control voltage. All motors are TEFC. All motor circuit wiring protected by individual circuit breakers. Electrical components housed in NEMA steel enclosures. Wiring in conduit.

Batch Control System

Semi-automatic cut-off of cement by presets on digital readouts. Push-button for electric over air on gates. Optional fully automatic computerized batch control system.

Water Meter

3” diameter (77 mm) with up to 500 gallons (1,740 liters) per minute

Transportation System

Rear-mounted 36,000 lb. (16,330 kg) capacity tandem axle with eight (8) 295/75R 22.5 tires, wheels, air brakes heavy duty spring suspension, tail and brake lights, and fifth wheel rub plate with king pin.

Storage Capacities

Aggregate Heaped Volume

60 to 120 cubic yards

45 to 122 cubic meters

Cement I Gross Volume

940 to 2,940 cubic feet

26 to 83 cubic meters

Cement II Gross Volume

1,600 to 4,920 cubic feet

45 to 139 cubic meters

Dimensions

Towing length……………51'0" (15,545 mm)