close translate
Products
Concrete Mixers

BHS Twin-Shaft Continuous Mixer

  • overview
  • features
BHS - The best twin shaft mixer on the planet?
You decide after watching this video.

Overview

  • Consistent, high quality mixing
    • The counter-rotating motion of the two mixing shafts as well as the inclined position of the mixing tools assure an intense vertical and horizontal motion of the mix. A uniform superior mix complying with the desired mixing formula is guaranteed.
  • Material bed as wear protection
    • A material bed is formed when handling and biding materials, which represents a protection against wear. For special applications lining of the mixer trough is optionally also available with cast wearing elements.
  • Simple Maintenance
    • Utilizing a very rugged construction, the mixer requires only minimal routine maintenance work. There are large maintenance doors on the top and bottom side.
  • Sturdy Drive
    • The drive system of the mixer is long-lasting and reliable. It conforms with the approved principles of the well-known BHS Twin-Shaft Batch Mixer. It can even cope with shock load and restart under full load.
  • Consistent high level homogeneous mixture within rapid mix cycles
    • Homogeneous mixture levels of 95% are achievable within 30 seconds
    • Batch after batch our mixers produce high level uniform and homogeneous mixtures
    • BHS Mixing techniques preserve the grain structure of the individual recipe components
  • High energy efficiency
    • High mixture performance is achieved at low speeds
    • Reduced energy consumption due to short mixing cycles,effectiveness of mixing tools and efficiency of drive units
  • Low-wear
    • Minimal wear of mixing tools and trough liners achieved from lower mixing speeds and mixer compact design
    • Reduced wear to internal mixer surfaces in relation to mixture volume
    • All wear parts have been optimized and designed for longevity
  • Efficient concrete production
    • Rapid and optimal bonding of cementitious particles
    • Potential of reducing cement content due to uniform and consistent mixture of all particles
    • Consistent and rapid distribution of admixtures and additives throughout the entire mixture volume
    • Batch to batch consistency for all mix designs
    • Minimum batch filling levels of 10% are possible
    • Guaranteed to mix special concrete recipes (SCC, RCC, UHPC, etc.)
    • Hybrid mixing cycles are possible (slow-fast-slow)
  • Click here for more information about products from BHS.
    •  
CON-E-CO Dust Collectors
The best gates in the industry
A bold statement that we’re certain you’ll agree with after watching this video, click here

Features

  • Consistent, High Quality Mixing:
    • The counter-rotating motion of the two mixing shafts as well as the inclined position of the mixing tools assure an intense vertical and horizontal motion of the mix. A uniform superior mix complying with the desired mixing formula is guaranteed.
  • Mixer Wear Liners:
    • Patented rhombus (diamond) shaped tiles with a material thickness of ¾” (19 mm) optimized with cast chromium steel is used for the mixing trough lining. These exclusive BHS design increases the service-life by 30% in comparison to other square shaped tiles.
    • Larger capacity mixers come standard with Optilong tile system with a material thickness of 1” (28 mm). Different material hardness of the specific tiling rows will ensure an even wear across all wear zones. The lifetime can double compared to standard thickness.
  • Simple Maintenance:
    • Utilizing a very rugged construction, the mixer requires only minimal routine maintenance work.
    • There are large maintenance doors on both top sides of the mixer.
  • Sturdy Drive:
    • The single stage drive system is long-lasting and reliable. It conforms with the approved principles of the well-known BHS Twin-Shaft Batch Mixer. The single stage drives and the floating mounting system has been designed to handle shock loads and restart under full load.
  • Consistent High Level Homogeneous Mixture within Rapid Mix Cycles:
    • Homogeneous mixture levels of 95% are achievable within 30 seconds
    • Batch after batch our mixers produce high level uniform and homogeneous mixtures
    • BHS Mixing techniques preserve the grain structure of the individual recipe components
  • High Energy Efficiency:
    • High mixture performance is achieved at low speeds
    • Reduced energy consumption due to short mixing cycles, the effectiveness of mixing tools and efficiency of drive units.
  • Low-Wear:
    • Minimal wear of mixing tools and trough liners achieved from lower mixing speeds and mixer compact design.
    • Reduced wear to internal mixer surfaces in relation to mixture volume
    • All wear parts have been optimized and designed for longevity
  • Efficient Concrete Production:
    • Rapid and optimal bonding of cementitious particles
    • Potential of reducing cement content due to uniform and consistent mixture of all particles
    • Consistent and rapid distribution of admixtures and additives throughout the entire mixture volume
    • Batch to batch consistency for all mix designs
    • Minimum batch filling levels of 10% are possible
    • Guaranteed to mix special concrete recipes (SCC, RCC, UHPC, etc.)
    • Hybrid mixing cycles are possible (slow-fast-slow)
    • Click here for more information about products from BHS.