CON-E-CO Dust Control Systems
Keeping Dust Off Trucks IncreasesYour Profit
- Reducing the time to rinse trucks after loading increases production
- Reducing driver cleaning maintenance increases the number of loads delivered to the job by each driver
- Reducing or eliminating acid bath cleanings doubles or triples the time between repainting
- Promoting a positive image increases market share
Serviceability
- Maintenance platforms with ladders and cages for easy maintenance access
- Totally enclosed, fan-cooled motors for protection against the elements
Electrical System
- Factory pre-wired system eliminates costly field wiring
- Factory-labeled, U.L. listed electrical panels
Pulse Jet Cleaning
- Aggressive cleaning for high-efficiency dust control
- Generous space between bags or cartridges prevents excessive vertical air velocity, allowing dust to release and fall into hopper
- Instantaneous pulse draws air from the large manifold on the dust collector to assure availability of air to pulse bags or cartridges
Optional Fill Line Automatic Pinch Valves
- Eliminates blinding of filter media from overfilling storage bins and silos
Optional PinchValve Air Supply
- Isolated 120-volt air compressor for after-hour deliveries
Optional Damper Valve
- Forces dust through filter media for after-hour deliveries when suction blower is not running
Optional High-Pressure Air Dryer
- Increases life of filter media
- Increases life of solenoid valves
Mobile central dust control
STANDARD FEATURES
- Pulse jet cleaning
- Work platforms with ladders and cages
- Pre-wired at factory
- Motor controls with circuit breakers
- Main disconnect with circuit breaker
- Factory U.L. listed panels
- NEMA 12 enclosures
- Automatic control panel
- Pre-plumbed at factory
- Solenoid valves mounted on manifolds with regulator
- Filler and lubricator n 7” diameter pressure relief valve (silo dust control systems)
- Weld-on riser and flange (silo dust control systems)
- Pulse jet bag type collector with 6:1 air-to-cloth ratio
- Pulse jet cartridge type collector with 5:1 air-to-cloth ratio
OPTIONAL FEATURES
- Manual reclaim system n Automatic reclaim system
- Silo expansion chamber for central dust control systems
- Silo ductwork for central dust control systems
Silo and truck charging dust control with optional water holding or weighted water lifting bale and reclaim-to-cement batcher
- Back-in or drive-in truck mixer shroud
- Drive-through truck mixer shroud
- Mixer ductwork for central and transit mixer
- Mobile transportation system
- High-pressure-supply air dryer
SILO DUST CONTROL SYSTEMS
- MODEL PJ-200
- 202 sq.ft. of bag cleaning area
- Capacity: 1,200 CFM
- MODEL PJ-300
- 297 sq.ft. of bag cleaning area
- Capacity: 1,800 CFM
- MODEL PJ-400
- 416 sq.ft. of bag cleaning area
- Capacity: 2,500 CFM
- MODEL PJC-300
- 300 sq.ft. of cartridge cleaning area
- Capacity: 1,500 CFM
- MODEL PJC-450
- 450 sq.ft. of cartridge cleaning area
- Capacity: 2,250 CFM
- MODEL PJC-600
- 608 sq.ft. of cartridge cleaning area
- Capacity: 3,040 CFM
- MODEL PJC-750
- 750 sq.ft. of cartridge cleaning area
- Capacity: 3,750 CFM
Ground-mounted dust control with automatic reclaim
- MODEL PJC-900
- 912 sq.ft. of cartridge cleaning area
- Capacity: 4,560 CFM
- MODEL PJC-1200
- 1,216 sq.ft. of cartridge cleaning area
- Capacity: 6,080 CFM
MIXER DUST CONTROL SYSTEM
- MODEL PJ-980
- 980 sq.ft. of bag cleaning area
- 15 HP blower at 5,880 CFM
CENTRAL DUST CONTROL SYSTEMS
- MODEL PJ-1400
- 1,427 sq.ft. of bag cleaning area
- 15 HP blower at 8,000 CFM
- MODEL PJ-2000
- 1,962 sq.ft. of bag cleaning area
- 20 HP blower at 10,500 CFM
MOBILE CENTRAL DUST CONTROL SYSTEM
- MODEL PJ-2000
- 2,030 sq.ft. of bag cleaning area
- 20 HP blower at 10,500 CFM
- MODEL PJ-2500
- 2,496 sq.ft. of bag cleaning area
- 30 HP blower at 15,000 CFM
